Santoku Knife 18 cm Silverback Knives - Tsuchime Finished, Complite Handle Gray
The classic Japanese Santoku chef's knife made of modern high performance blade steel and special surface.
HAP40 is an exceptional steel that has not been used for chef's knives for too long. It belongs to the group of powder metallurgical steels, which obtain a more uniform steel structure than cast steels by melting pure metal powder under pressure. Particularly noteworthy is the extreme hardness of the HAP40 steel used for this blade. Through a special heat treatment with salt baths, the steel achieves a hardness of HRC 65-67.
Currently, HAP40 is only processed by a few Japanese blacksmiths in the traditional way, so the supply of HAP40 blades is still very limited. We are therefore proud to offer our own HAP40 series. We have the Silverback HAP40 knives forged for us by specialists in and around Seki, Japan, according to our specifications and are pleased to be able to offer this series at attractive prices. Each knife in this series is engraved with the Silverback "銀 背" (Japanese for silverback) and is therefore unique and only available from us. The HAP40 core of this Silverback Knives Santoku is surrounded by a 404 stainless steel sheath. This sheath steel has been machined so that the surface in the upper blade area has a hammered surface. This surface structure is called Tsuchime and serves on the one hand the optics, at the same time, however, food sticks less when cutting, because small air pockets between blade and cut material arise during the cutting.
The sheath steel is forged around the core steel using the San Mai method. This chef's knife is lightweight and perfectly balanced. The blade, which is very fine compared to other traditional Japanese knives, is often referred to as a laser blade. After hardening, the blade is ground on both sides and set into the Complite handle. This is made of high quality reinforced wood, resulting in excellent robustness and durability.
The Santoku has a blade length of 180 mm and forms a point at the end of the blade. An interesting feature of this knife is the slightly curved blade shape at the back of the blade. On the one hand, this geometry saves weight, which improves the balance of the knife, and at the same time this blade back creates a dynamic look.
Santoku knife means "knife of the three virtues". This translation already describes santokus well, as they are equally suitable for cutting meat, fish and vegetables.
The Santoku is an all-purpose knife and can be used for meat, fish, fruit and vegetables. The fine chopping of herbs or onions is just as feasible as coarse preparation work. The relatively high blade in relation to the blade length is characteristic of this type of knife.
- Length blade: 180mm
- Height blade: 46mm
- Length handle: 140mm
- Length blade: 330mm
- Weight: 151g
- Handle: Complite gray
- Hardness grade core steel: HRC 66-67
- Sheath steel: Stainless steel 404 with polished surface
- Blade construction: 3-ply according to the San Mai method
- Double sided grinding of the cutting edge
PRODUCT AN CARE INSTRUCTIONS
- This knife is not suitable for hard cuts such as bones and frozen food.
- These knives should never be put in the dishwasher and must be rinsed and dried by hand after each use to ensure long life.
- If not properly cared for, these blades tend to rust. Regular treatment with oil is also recommended.
- As the knives are handmade, each individual knife is unique.
- This also means that the knives may differ slightly in appearance.
Only accept parcels in perfect condition.
Damaged parcels must be reported to the deliverer unopened within 7 days to ensure the liability case.
Silverback Knives GmbH cannot accept any liability for damaged packages.
(1) if products are missing or damaged due to damaged packages.
(2) if parcels are damaged.
Germany & Austria:
For deliveries within Germany and Austria, we charge a flat shipping fee of EUR 5.00 gross for standard shipping by DHL up to an order value of EUR 200.00 gross. From an order value of 200.00 EUR gross, we deliver free of charge within Germany & Austria via DHL standard shipping.
For DHL express deliveries, we charge a flat rate of EUR 13.00 gross for deliveries within Germany. DHL express deliveries are not provided free of charge. In case of return due to revocation, only the standard shipping fee of 5.00€ will be refunded.
Luxembourg, Nederland (Netherlands), Belgique / België (Belgium), France, Italia (Italy), Suomi (Finland), Slovenija (Slovenia), Danmark (Denmark), Ireland, Malta, Polska (Poland), Portugal, Slovenská republika (Slovakia), España (Spain), Sverige (Sweden), România (Romania), Hrvatska (Croatia), Ελλάδα (Greece), Bulgaria and Česká republika (Czech Republic):
For deliveries to Luxembourg, Nederland (Netherlands), Belgique / België (Belgium), France, Italia (Italy), Suomi (Finland), Slovenija (Slovenia), Danmark (Denmark), Ireland, Malta, Polska (Poland), Portugal, Slovenská republika (Slovakia), España (Spain), Sverige (Sweden), Bulgaria, România (Romania), Hrvatska (Croatia), Ελλάδα (Greece) and Česká republika (Czech Republic) we charge a flat shipping fee of 7.00 EUR gross for standard shipping via DHL.
For shipping to Luxembourg, Nederland (Netherlands), Belgique / België (Belgium), France, Italia (Italy), Suomi (Finland), Slovenija (Slovenia), Danmark (Denmark), Ireland, Malta, Polska (Poland), Portugal, Slovenská republika (Slovakia), España (Spain), Sverige (Sweden), Bulgaria, România (Romania), Hrvatska (Croatia), Ελλάδα (Greece) and Česká republika (Czech Republic) are not offered free shipping.